Accurately tracking how plastic biodegrades
Researchers at ETH Zurich have developed an approach to accurately record and fully track the biodegradation of plastics in soils
However, it is usually very time-consuming and costly for farmers to collect and dispose of conventional polyethylene (PE) film after use. In addition, it isn’t possible to re-collect all of the thin PE films, as they tear easily. This means PE-pieces remain on and in the soil and accumulate there, because PE doesn’t degrade.
Biodegradable mulch film is a promising alternative, because – in contrast to PE film – it ideally does not to leave behind any polymer components in the soil environment. The biodegradable polymers it contains are deliberately designed so that microorganisms can use them to generate energy and build cell biomass. The biodegradable polymers have intended chemical “breaking points” in their backbone structure. Naturally occurring microorganisms, such as those in soil, can release enzymes into their environment that attack these points in the polymers and break them down. The small degradation products released are then taken up by the microbes and ultimately respired to form the final product, CO2.
That’s why proving CO2 formation from polymer carbon is crucial for biodegradation. Also because in addition to truly biodegradable plastics, there are falsely labelled ones based on PE containing specific additives. These films break down only into very small microplastics that are no longer visible to the naked eye. And because these aren’t degraded by microorganisms, they accumulate in the environment.
New approach captures all aspects of biodegradation
Until now based on existing methods, it hasn’t been possible to follow the process of polymer biodegradation in its entirety. But over the past few years, the Environmental Chemistry Group at ETH Zurich has developed a new approach to track and measure whether and to what degree a polymer biodegrades in a soil. Their findings have just been published in Nature Communications.
These results could change the way polymer biodegradation is studied in the future. The project also involved researchers from ETH’s Earth Sciences department and Eawag, in addition to employees from the chemical company BASF.
This new approach is based on using polymers labelled with stable carbon isotopes (13C). This labelling allows the researchers to selectively track the polymer’s 13C during biodegradation in the soil, so they can unmistakably demonstrate that biodegradation is indeed occurring. Until now, plastic biodegradability had been tested only with non-isotopically labelled polymers. A polymer (or a plastic material consisting of one or more polymers) is certified as biodegradable if the fraction of added polymer carbon converted into CO2 exceeds a predefined level over a specific incubation period. The standard for biodegradable mulch film, for example, requires two-year soil incubations in which at least 90 percent of the mulch film carbon is “mineralised” into CO2.
These test methods are well established as a suitable means for detecting polymer mineralisation. However, they do not capture the full extent of the biodegradation, as they measure only CO2 formation. Consequently, researchers using today’s standard methods have been unable to detect the amount of polymer carbon remaining in the soil at the end of an incubation period. In addition, it was unclear whether this remaining carbon was present still in the form of the added polymer or whether microorganisms had already incorporated it into their biomass.
Closed carbon mass balances
The approach developed by the ETH researchers and their colleagues eliminates these ambiguities. In their tests, they used 13C-labelled polybutylene succinate, or PBS – a commercially important biodegradable polyester that is also used in mulch films.
The researchers were now able to selectively track the 13C in the PBS during biodegradation: in addition to determining mineralisation to 13CO2, the authors demonstrated complete mass balances for the PBS carbon by quantifying the residual amount of PBS-derived 13C that remained in the soil after incubation.
“It was gratifying for us to see closed carbon mass balances over the 425 days of soil incubation. This showed that we can accurately determine where the polymer carbon ends up – about two-thirds in CO2 and one-third in soil – over these very long incubation periods,” explains the study’s lead author, Taylor Nelson, who earned his doctorate in the Environmental Chemistry Group.
The researchers also wanted to know in which form the carbon added as PBS remained in the soil. How much was incorporated into the microbial biomass and how much was still present as residual PBS?
To answer this question, the authors extracted and quantified the residual PBS from the soil at the end of the incubations. They were able to show that while most of the carbon was still present as PBS, a significant amount – 7 percent – of the added PBS carbon had been incorporated into the microbial biomass.
The ability to determine exactly how much polymer remains and how much polymer carbon has been incorporated into biomass is essential for future studies and for the development of new biodegradable polymers. “We can now systematically test for soil conditions and polymer properties that allow for complete biodegradation of the polymers to CO2 and to microbial biomass – and we can assess factors that may slow down polymer biodegradation over time,” explains Michael Sander, Professor in the ETH Environmental Chemistry Group.
This work is already underway: using the new approach, the group is currently investigating the biodegradation of further polymers in various agricultural soils, including in the field. “In this way, we want to ensure that biodegradable polymers live up to their name and don’t remain in the environment,” says Kristopher McNeill, Professor of Environmental Chemistry at ETH Zurich and head of an eponymous research subgroup.
“Replacing conventional polymers with biodegradable ones can help reduce plastic pollution, especially for applications in which polymers are used directly in the environment such that there’s a high likelihood that the polymers will remain there after use,” Sander points out.
Other news from the department science
Start-up Colossal Biosciences Joins Biorescue In Its Mission To Save The Northern White Rhino From Extinction
Colossal will assist the rescue mission by leveraging genome sequencing and gene editing methods to save the endangered species
"For the first time, we have systematically measured the size and abundance of cells across all major tissues and organs"
What's that smell? New gut microbe produces smelly toxic gas but protects against pathogens
Taurine-degrading bacteria influence intestinal microbiome
Wastewater treatment plants as drivers for the energy transition
Technical add-on module can, in principle, turn any wastewater treatment plant into a CO2 sink and decentralized methane production plant
At which age we are at our happiest
An evaluation of over 400 samples shows how subjective well-being develops over the course of a lifespan
New approach to testing for long Covid
Blood vessels in the eye altered with persistent coronavirus symptoms
Researchers create pioneering approaches for the detection of viral antigens
Sybodies: a revolution in biological recognition
New SARS-CoV-2 variant Eris on the rise
SARS-CoV-2 lineage EG.5.1 has an advantage at evading neutralizing antibodies
Does the human brain have an Achilles heel that ultimately leads to Autism?
CHOOSEn fate: one brain organoid’s tale on Autism
Co-crystal improves the water-solubility of ASA
This could benefit patients diagnosed with suspected acute myocardial infarction
Observing nanoparticles with unprecedented precision
Illuminated: Researchers investigate new physical phenomena on the nanoscale with microstructured fibers
Falling Walls announces Science Breakthrough of the Year 2023 laureates
“These outstanding breakthroughs will change the face of the world and impressively prove what ingenuity, curiosity and courage can achieve”
Most read news
Cells with an ear for music release insulin
For the first time, researchers are using music, including Queen's global hit "We will rock you," to stimulate insulin release from cells
"Anti-obesity drugs" normalises brain in obesity
Anti-obesity drug improves associative learning in people with obesity
Microbe of the Year 2023: Bacillus subtilis – for health and technology
Already, Bacillus subtilis is indispensable in many industries, and many more innovations are expected
Younger generation gets sick earlier and more often than older generation
In spite of their advanced age, they are in the middle of life, healthy, active and mentally alert – they are referred to as the “young old”
How sleep deprivation can harm the brain
Sleep deprivation decreases the amount of a factor that protects neurons
A whole new order of bacteria could hold the key to improving biogas production
The discovery was made by researchers from Germany, Spain and the Netherlands
How to inactivate common cold viruses
In the cold season, cold viruses are everywhere. But we can do something about it
How minimal genetic differences can turn healthy food into a deadly danger
You are what you eat - this old saying could take on a new dimension according to latest research results
New approach to testing for long Covid
Blood vessels in the eye altered with persistent coronavirus symptoms
More news from our other portals
Major breakthrough in the development of electric vehicle batteries
New study finds ways to suppress lithium plating in automotive batteries for faster charging electric vehicles
Blender Bites launches at Walmart USA
The products are to be introduced in about 1,600 stores across the country
Benchtop NMR spectroscopy can accurately analyse pyrolysis oils
More accessible analysis could help develop the potential of bio-oils as an alternative to fossil fuels
Green methanol for shipping and industry: € 10.4 Mio. for the "Leuna100" project
A consortium of two Fraunhofer institutes, DBI-Gastechnologisches Institut Freiberg, Technical University of Berlin and C1 makes industrial history at the Leuna site
Clean water from fog
A property known as photocatalytic memory ensures that this also functions when skies are overcast and at night
Stanford study shows how the meat and dairy sector resists competition from alternative animal products
Research shows table salt could be the secret ingredient for better chemical recycling
Table salt as the key to the plastics recycling revolution?
Green, sweet and crisp - New apple variety Pia41 approved
The apple bred at the Julius Kühn Institute receives variety protection
Graphene discovery could help generate hydrogen cheaply and sustainably
Microscopic insights into electrochemical interfaces
Special iron uptake deep inside the Savoy cabbage head
It has been revealed that the mechanism of iron uptake by plastids in the absence of light is similar to the process facilitated by photosynthesis.
Scientists use quantum device to slow down simulated chemical reaction 100 billion times
What happens in femtoseconds in nature can now be observed in milliseconds in the lab
New battery holds promise for green energy
Redox-flow battery eliminates costly and inefficient membrane
Sugar: Small increase in production despite record prices
EU sugar market more than in need of reform to keep medium-sized processing companies competitive
Fondant under the magnifying glass
New insights into the properties of sweet coating: The results could be used to optimize the industrial production process in the future
Cleaning water with ‘smart rust’ and magnets
New method for pollutants such as crude oil, glyphosate, microplastics and hormones
Leipzig-based start-up converts CO₂ into green chemicals with patented plasma catalysis
CO₂ recycling as a useful complement to carbon capture and storage
A microchip for Parmigiano Reggiano cheese
Consorzio del Parmigiano Reggiano, p-Chip Corporation, and Kaasmerk Matec Partner to Launch Breakthrough in Food-Safe Digital Tracking Technology