My watch list
my.bionity.com  
Login  

Flax



Flax

Common Flax
Scientific classification
Kingdom: Plantae
Division: Magnoliophyta
Class: Magnoliopsida
Order: Malpighiales
Family: Linaceae
Genus: Linum
Species: L. usitatissimum
Binomial name
Linum usitatissimum
Linnaeus.

Flax (also known as Common Flax or Linseed) is a member of the genus Linum in the family Linaceae. The New Zealand flax is unrelated. Flax is native to the region extending from the eastern Mediterranean to India and was probably first domesticated in the Fertile Crescent.[1] It was extensively cultivated in ancient Egypt.

It is an erect annual plant growing to 1.2 m tall, with slender stems. The leaves are glaucous green, slender lanceolate, 20-40 mm long and 3 mm broad. The flowers are pure pale blue, 15-25 mm diameter, with five petals. The fruit is a round, dry capsule 5-9 mm diameter, containing several glossy brown seeds shaped like an apple pip, 4-7 mm long.

In addition to the plant itself, flax may refer to the unspun fibres of the flax plant.

Contents

Uses

Flax is grown both for its seeds and for its fibers. Various parts of the plant have been used to make fabric, dye, paper, medicines, fishing nets, soap, and bowstrings. It is also grown as an ornamental plant in gardens.

Flax seed

 

Flax seed
Nutritional value per 100 g (3.5 oz)
Energy 530 kcal   2230 kJ
Carbohydrates     28.88 g
- Sugars  1.55 g
- Dietary fiber  27.3 g  
Fat42.16 g
Protein 18.29 g
Thiamin (Vit. B1)  1.644 mg  126%
Riboflavin (Vit. B2)  0.161 mg  11%
Niacin (Vit. B3)  3.08 mg  21%
Pantothenic acid (B5)  0.985 mg 20%
Vitamin B6  0.473 mg36%
Folate (Vit. B9)  0 μg 0%
Vitamin C  0.6 mg1%
Calcium  255 mg26%
Iron  5.73 mg46%
Magnesium  392 mg106% 
Phosphorus  642 mg92%
Potassium  813 mg  17%
Zinc  4.34 mg43%
Percentages are relative to US
recommendations for adults.
Source: USDA Nutrient database

Flax seeds come in two basic varieties, brown and yellow or golden, with most types having similar nutritional values and equal amounts of short-chain omega-3 fatty acids. The exception is a type of yellow flax called Linola or solin, which has a completely different oil profile and is very low in omega-3. Although brown flax can be consumed as readily as yellow, and has been for thousands of years, it is better known as an ingredient in paints, fibre and cattle feed. Flax seeds produce a vegetable oil known as flaxseed or linseed oil; it is one of the oldest commercial oils and solvent-processed flax seed oil has been used for centuries as a drying oil in painting and varnishing.

One tablespoon of ground flax seeds and three tablespoons of water may serve as a replacement for one egg in baking by binding the other ingredients together. Ground flax seeds can also be mixed in with oatmeal, yogurt, wafer (similar to Metamucil), or any other food item where a nutty flavour is appropriate. Flax seed sprouts are edible, with a slightly spicy flavour. Excessive consumption of flax seeds can cause diarrhea.[2]

Though flax seeds are chemically stable while whole, ground whole seeds or oils become rancid much more quickly upon exposure to oxygen, and require special storage (generally refrigeration or in sealed packaging) to remain nutritious for even a short period of time.[3]

Possible medical benefits

Main article: Linseed_oil#Nutritional_supplement

Flaxseeds contain high levels of lignans and Omega-3 fatty acids. Lignans may benefit the heart, possess anti-cancer properties and studies performed on mice found reduced growth in specific types of tumours. Initial studies suggest that flaxseed taken in the diet may benefit individuals with certain types of breast[4][5] and prostate cancers.[6] Flax may also lessen the severity of diabetes by stabilizing blood-sugar levels.[7] There is some support for the use of flax seed as a laxative due to its dietary fiber content[2] though excessive consumption without liquid can result in intestinal blockage.[8] Consuming large amounts of flax seed can impair the effectiveness of certain oral medications, due to its fiber content.[8]

Flax fibers

Flax fibers are amongst the oldest fiber crops in the world. The use of flax for the production of linen goes back 5000 years. Pictures on tombs and temple walls at Thebes depict flowering flax plants. The use of flax fibre in the manufacturing of cloth in northern Europe dates back to Neolithic times. In North America, flax was introduced by the Puritans. Currently most flax produced in the USA and Canada are seed flax types for the production of linseed oil or flaxseeds for human nutrition.

Flax fibre is extracted from the bast or skin of the stem of flax plant. Flax fibre is soft, lustrous and flexible. It is stronger than cotton fibre but less elastic. The best grades are used for linen fabrics such as damasks, lace and sheeting. Coarser grades are used for the manufacturing of twine and rope. Flax fibre is also a raw material for the high-quality paper industry for the use of printed banknotes and rolling paper for cigarettes. Flax mills for spinning flaxen yarn were invented by John Kendrew and Thomas Porthouse of Darlington in 1787.[9]

Cultivation

 

  The major fibre flax-producing countries are Canada, USA and China, though there is also significant production in India and throughout Europe.

The soils most suitable for flax, besides the alluvial kind, are deep friable loams, and containing a large proportion of organic matter. Heavy clays are unsuitable, as are soils of a gravelly or dry sandy nature. Farming flax requires few fertilizers or pesticides. Within six weeks of sowing, the plant will reach 10-15 cm in height, and will grow several centimetres per day under its optimal growth conditions, reaching 70-80 cm within fifteen days.

Flax is harvested for fibre production after approximately 100 days, a month after the plant flowers and two weeks after the seed capsules form. The base of the plant will begin to turn yellow; if the plant is still green the seed will not be useful, and the fiber will be underdeveloped. The fiber degrades once the plant is brown. The mature plant is pulled up with the roots (not cut), so as to maximize the fiber length. After this the flax is allowed to dry, the seeds are removed, and is then retted. Dependant upon climatic conditions, characteristics of the sown flax and fields, the flax remains in the ground between 2 weeks and 2 months for retting. As a result of alternating rain and the sun, an enzymatic action degrades the pectins which bind fibres to the straw. The farmers turn over the straw during retting to evenly rett the stalks. When the straw is retted and sufficiently dry, it is rolled up. It will then be stored by farmers before scutching to extract fibres.

Flax grown for seed is allowed to mature until the seed capsules are yellow and just starting to split; it is then harvested by combine harvester and dried to extract the seed.

Threshing flax

  Threshing is the process of removing the seeds from the rest of the plant.

The process is divided into two parts: the first part is intended for the farmer, or flax-grower, to bring the flax into a fit state for general or common purposes. This is performed by three machines: one for threshing out the seed, one for breaking and separating the straw (stem) from the fibre, and one for further separating the broken straw and matter from the fibre. In some cases the farmers thrash out the seed in their own mill and therefore, in such cases, the first machine will be unnecessary.

The second part of the process is intended for the manufacturer to bring the flax into a state for the very finest purposes, such as lace, cambric, damask, and very fine linen. This second part is performed by the refining machine only.

The threshing process would be conducted as follows:

  • Take the flax in small bundles, as it comes from the field or stack, and holding it in the left hand, put the seed end between the threshing machine and the bed or block against which the machine is to strike; then take the handle of the machine in the right hand, and move the machine backward and forward, to strike on the flax, until the seed is all threshed out.
  • Take the flax in small handfuls in the left hand, spread it flat between the third and little finger, with the seed end downwards, and the root-end above, as near the hand as possible.
  • Put the handful between the beater of the breaking machine, and beat it gently till the three or four inches, which have been under the operation of the machine, appear to be soft.
  • Remove the flax a little higher in the hand, so as to let the soft part of the flax rest upon the little finger, and continue to beat it till all is soft, and the wood is separated from the fibre, keeping the left hand close to the block and the flax as flat upon the block as possible.[citation needed]
  • The other end of the flax is then to be turned, and the end which has been beaten is to be wrapped round the little finger, the root end flat, and beaten in the machine till the wood is separated, exactly in the same way as the other end was beaten.

Diseases

Main article: List of flax diseases

Preparation for spinning

  Before the flax fibers can be spun into linen, they must be separated from the rest of the stalk. The first step in this process is called "retting". Retting is the process of rotting away the inner stalk, leaving the outer fibres intact. At this point there is still straw, or coarse fibers, remaining. To remove these the flax is "broken", the straw is broken up into small, short bits, while the actual fiber is left unharmed, then "scutched", where the straw is scraped away from the fiber, and then pulled through "hackles", which act like combs and comb the straw out of the fiber.

Retting flax

There are several methods of retting flax. It can be retted in a pond, stream, field or a container. When the retting is complete the bundles of flax feel soft and slimy, and quite a few fibres are standing out from the stalks. When wrapped around a finger the inner woody part springs away from the fibres.

Pond retting is the fastest. It consists of placing the flax in a pool of water which will not evaporate. It generally takes place in a shallow pool which will warm up dramatically in the sun; the process may take from only a couple days to a couple weeks. Pond retted flax is traditionally considered lower quality, possibly because the product can become dirty, and easily over-retts, damaging the fiber. This form of retting also produces quite an odor.

Stream retting is similar to pool retting, but the flax is submerged in bundles in a stream or river. This generally takes longer than pond retting, normally a two or three weeks, but the end product is less likely to be dirty, does not stink as much, and because the water is cooler it is less likely to be over-retted.

Both Pond and Stream retting were traditionally used less because they pollute the waters used for that process.

Field retting is laying the flax out in a large field, and allowing dew to collect on it. This process normally takes a month or more, but is generally considered to provide the highest quality flax fibers, and produces the least pollution.

Retting can also be done in a plastic trash can, or any type of water tight container of wood, concrete, earthenware or plastic. Metal containers will not work, as an acid is produced when retting, and it would corrode the metal. If the water temperature is kept at 80 °F, the retting process under these conditions takes 4 or 5 days, and if the water is any colder it takes longer. Scum will collect at the top, and an odour is given off, like in pond retting.

Dressing the flax

Dressing the flax is the term given to removing the straw from the fibers. It consists of three steps, breaking, scotching, and hackling. The breaking breaks up the straw, then some of the straw is scraped from the fibers in the scotching process, then the fiber is pulled through hackles to remove the last bits of straw.

The dressing is done as follows:

Breaking The process of breaking breaks up the straw into short segments. To do it, take the bundles of flax and untie them. Next, in small handfuls, put it between the beater of the breaking machine ( a set of wooden blades which mesh together when the upper jaw is lowered- it looks like a paper cutter but instead of having a big knife it has a blunt arm), and beat it till the three or four inches that have been beaten appear to be soft. Move the flax a little higher and continue to beat it till all is soft, and the wood is separated from the fiber. When half of the flax is broken, hold the beaten end and beat the rest in the same way as the other end was beaten, till the wood is separated.
Scotching In order to remove some of the straw from the fiber, it helps to swing a wooden scotching knife down the fibers while they hang vertically, thus scraping the edge of the knife along the fibers and pull away pieces of the stalk. Some of the fiber will also be scotched away, this cannot be helped and is natural.
Hackles In this process the fiber is pulled through various different sized hackles. A hackle is a bed of "nails"- sharp, long-tapered, tempered, polished steel pins driven into wooden blocks at regular spacing. A good progression is from 4 pins per square inch, to 12, to 25 to 48 to 80. The first three will remove the straw, and the last two will split and polish the fibers. Some of the finer stuff that comes off in the last hackles is called "tow" and can be carded like wool and spun. It will produce a coarser yarn than the fibers pulled through the heckles because it will still have some straw in it.

Flax as a symbolic image

 

  • Common flax is the national flower of Belarus.
  • Flax is the emblem of the Northern Ireland Assembly.
  • The flax plant, in a coronet, appeared on the reverse of the British one pound coin to represent Northern Ireland on coins minted in 1986 and 1991.

Flax in popular culture

  • In English, blond hair is traditionally referred to as "fair" or "flaxen".
  • The expression "tow-head" or "toe-head," used to describe a a person with blond hair, comes from the name for the fine, oft-tangled fibers left behind in the hackles, when processing flax into linen.

See also

  • Irish linen

Notes

  1. ^ Alister D. Muir, Neil D. Westcot, "Flax: The Genus Linum"., page 3 (August 1 2003)
  2. ^ a b Mayo Clinic (2006-05-01). Drugs and Supplements: Flaxseed and flaxseed oil (Linum usitatissimum). Retrieved on 2007-07-02.
  3. ^ Weil, Andrew (2006-09-01). Get the Facts on Flax. Retrieved on 2007-11-23.
  4. ^ Chen J, Wang L, Thompson LU (2006). "Flaxseed and its components reduce metastasis after surgical excision of solid human breast tumor in nude mice". Cancer Lett. 234 (2): 168–75. doi:10.1016/j.canlet.2005.03.056. PMID 15913884.
  5. ^ Thompson LU, Chen JM, Li T, Strasser-Weippl K, Goss PE (2005). "Dietary flaxseed alters tumor biological markers in postmenopausal breast cancer". Clin. Cancer Res. 11 (10): 3828–35. doi:10.1158/1078-0432.CCR-04-2326. PMID 15897583.
  6. ^ "Flaxseed Stunts The Growth Of Prostate Tumors", ScienceDaily, 2007-06-04. Retrieved on 2007-11-23. 
  7. ^ Dahl, WJ; Lockert EA Cammer AL Whiting SJ (December 2005). "Effects of Flax Fiber on Laxation and Glycemic Response in Healthy Volunteers". Journal of Medicinal Food Vol. 8 (No. 4): 508-511. Retrieved on 2007-05-14.
  8. ^ a b Flaxseed and Flaxseed Oil. National Center for Complementary and Alternative Medicine. Retrieved on 2008-01-03.
  9. ^ Wardey, A. J. (1967). The Linen Trade: Ancient and Modern. Routledge, 752. ISBN 071461114X. 

References

  • USDA profile of flax
  • The 1881 Household Cyclopedia
  • Alternative Field Crops Manual: Flax
  • Health Benefits of ground flax seeds from World's Healthiest Foods
  • University of Arizona Text: Flax Culture and Preparation; Bradbury, Fred; Sir Isaac Pitman & Sons, 187 pages; copyright estimated 1895-1912, file sz 11.1 MB (PDF). On-Line Digital Archive of Documents on Weaving and Related Topics.
 
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Flax". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE