Siebe Gorman Proto

  The Proto is a type of rebreather that was made by Siebe Gorman. It was an industrial breathing set and not suitable for diving. It was made from probably 1914 or earlier to the 1960's or later. (Distinguish from "Proton", which is another sort of Siebe Gorman rebreather).

Additional recommended knowledge

Daily Sensitivity Test

Daily Visual Balance Check

Guide to balance cleaning: 8 simple steps

Its breathing bag was worn on the chest. It had one or two oxygen cylinders, across the lumbar part of the back: often one, but this image shows two. Its duration in use was one or two hours, dependant on the size of oxygen cylinder fitted. Its absorbent (tradename Protosorb) was loose in the bottom of the breathing bag, restrained by a perforated cloth partition, and not in a canister. It had two wide breathing tubes running from the breathing bag to either a strapped-in mouthpiece (used with goggles) or an industrial-type fullface mask known as a Vistarama face mask, with a curved window and an inner ori-nasal mask. The canister seen on the front of the bag was to cool the gas in circuit, as the absorbent gets warm as it absorbs carbon dioxide, and that warming of the gas in circuit is welcome when scuba diving in cold water, but is not welcome in hot industrial situations including in deep mines.

It was much used by firefighters and in rescue in coalmines, long before open-circuit industrial breathing sets based on the aqualung became common. It appeared in many news images of coalmine rescue squads.

External links

• http://www.therebreathersite.nl/Zuurstofrebreathers/English/proto.htm description
• http://www.therebreathersite.nl/Zuurstofrebreathers/English/photos_proto.htm images