My watch list
my.bionity.com  
Login  

Isotopic dilution



Isotopic dilution is a technique to increase the precision and accuracy of chemical analysis. First, a known amount of an isotope is added to the sample. For example, to determine the amount of lead in a sample, a known amount of Pb-204, one of the isotopes of lead, can be added. The natural abundance of lead isotopes is 204 (1.4%), 206 (24.1%), 207 (22.1%), and 208 (52.4%). The isotopic composition of the sample will be slightly changed. Then, by measuring each isotope, the amount of lead in the original sample can be calculated. In a typical gas chromatography analysis, isotopic dilution can decrease the error of injection from 5% to 1%. It can also be used in mass spectrometry (commonly referred to as isotopic dilution mass spectrometry or IDMS), in which the isotopic ratio can be determined with precision typically better than 0.25% [1].

A slightly different form of isotopic dilution can be used for determining the composition of a radioactive sample. An additional amount of the radioactive isotope in the sample is added and the change in radioactivity is measured. The amount of the isotope in the original sample can then be calculated.

References

  1. ^ EPA publication SW-846, "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", available at http://www.epa.gov/epaoswer/hazwaste/test/sw846.htm. See Method 6800, "Elemental and Speciated Isotope Dilution Mass Spectrometry", available at http://www.epa.gov/epaoswer/hazwaste/test/pdfs/6800.pdf.
 
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Isotopic_dilution". A list of authors is available in Wikipedia.
Your browser is not current. Microsoft Internet Explorer 6.0 does not support some functions on Chemie.DE