Sodium iodide is a white, crystalline salt with chemical formula NaI used in radiation detection, treatment of iodine deficiency, and as a reactant in the Finkelstein reaction.

Uses

Sodium iodide is commonly used to treat and prevent iodine deficiency.

Sodium iodide is used in polymerase chain reactions, and also (as an acetone solution) in the Finkelstein reaction, for conversion of an alkyl chloride into an alkyl iodide. This relies on the insolubility of sodium chloride in acetone to drive the reaction.

R-Cl + NaI → R-I + NaCl

Solid crystals of sodium iodide can be used to detect radiation (e.g. radiation from uranium)—a solid crystal of sodium iodide creates a pulse of light when radiation interacts with it.^[2]

Sodium iodide crystals doped with thallium, NaI(Tl), when subjected to ionising radiation, emit photons (scintillate) and are used in scintillation detectors, traditionally in nuclear medicine, geophysics, nuclear physics, environmental measurements, etc. NaI(Tl) is the most widely used scintillation material and has the highest light output. The crystals are usually coupled with a photomultiplier tube, in a hermetically sealed assembly, as sodium iodide is hygroscopic. Fine tuning of some parameters (radiation hardness, afterglow, transparency) can be achieved by varying the conditions of the crystal growth. Crystals with higher level of doping are used in X-ray detectors with high spectrometric quality. Sodium iodide can be used both as single crystals and as polycrystals for this purpose.

Notes, references

1. ^ Burgess, J. "Metal Ions in Solution" (Ellis Horwood, New York, 1978) ISBN 0-85312-027-7
2. ^ DIY Nuke Detector Patrols SF Bay

See also

• Scintillation counter
• Gamma spectroscopy